Anadol SF22 Digital Satellite Finder Optical and Acoustic Signaling Black

With the digital Satfinder SF-22 from Anadol you can adjust your satellites easily and in a few minutes.

The perfect digital satellite finder
Thanks to the scale display, which shows the current signal strength and the acoustic tone, you can easily find the right frequency for your desired station in no time. No batteries necessary due to automatic power supply via the receiver or your TV. The illuminated display shows you the current signal strength, in addition you follow the acoustic signal which enables the best possible adjustment. The exact LNB alignment is automatically recognized by our device and allows you a high-resolution and noise-free image. With our Anadol satellite finder, you can find the optimal position in no time by connecting the satellite and receiver by fixing your dish.

Easy and Quick Installation
Whether you're camping, traveling in a caravan or in your home, our Anadol satellite finder will help you find the perfect picture for your favorite station

Controls:
Display scale
LNB connection
LED 0 / 22kHz
LED H / V
Output to the receiver
sensitivity control

Benefits:
Illuminated display
Battery-free use
Acoustic signal generator

Technical Info:
DC pass to the LNB
Line IF signal strength meter
Supply voltage: 13 - 18 DC
Input frequency: 950 - 2150 MHz
Input level max .: -10 dBm
Min input level: -40 dBm
Built-in 0 / 22Khz, 13 / 18V including LED
Weight: 150 g

Service:
- Connect the antenna cable (coming from the LNB of the SAT antenna) to the LNB connector of the SAT finder
- Connect the antenna cable (coming from the receiver / multiswitch) with the output to the receiver of the SAT finder.
- Check the correct connection on the SAT finder and the functionality of your receiver or the connected multiswitches.
- After switching on the SAT receiver, the display scale of the SAT finder lights up.
- Now regulate on the sensitivity control until the needle on the display scale points to.
- Now align your satellite antenna by tilting and swiveling it out.
- The closer you swivel to the satellite, the higher the needle deflects on the incline scale and the signal tone increases.
- When the final deflection of the optimal adjustment has been reached, a lower value can be set with the sensitivity control until the needle of the level indicator is in the middle.
- The LED 22 kHz indicates whether the receiver is sending a 22 Khz signal. As a rule, this signal is used to switch the corresponding LNBs from the lower to the upper frequency band. You can use the indication to set the maximum level for both frequency bands.

Delivery:
1x Anadol Digital Satellite Finder
1x User Manual (German)